§ 28-255. Application procedures.

Application for sign permits shall be made upon forms provided by the city and shall have attached thereto the following information:

(a)

Applicant must fill out a city sign application form obtained from the zoning administrator.

(b)

Information that must be included in the application is:

(1)

Location. A written description of the sign as well as an adequate staking of the requested sign location that would allow for on-site inspection.

(2)

A drawing of the sign and any structural supports, which gives all dimensions of the sign and structure (i.e., length, width, and height).

(3)

A schematic sketch or drawing of the site showing its relationship to the roadway and adjacent land uses and any landscaping to be used in conjunction with the sign. The sketch shall be drawn at a readable scale with a scale bar.

(4)

A schematic sketch or drawing of the building façade with dimensions (width) and schematic sketch or drawing with dimensions (length, width, and height) of all other signs on the property.

(5)

Information to confirm the sign will be installed or altered by a contractor registered with the city. No person shall engage in the business of erecting or installing signs without registering with the city to conduct such operations.

(c)

Signs shall conform to all aspects of this chapter.

(d)

Application shall be made to the zoning administrator.

(e)

Where it is alleged that there is an error in any order, requirement, decision, grant or refusal made by the zoning administrator in the interpretation of this chapter, the zoning board of appeals shall have the power to hear and decide appeals, filed as provided in section 28-244.

(Ord. No. 2016.07, § 2, 3-29-16)